Drain Cleaner

A drain cleaner is a powerful chemical solution designed to dissolve organic and inorganic blockages inside plumbing systems. PlusProline Drain Cleaner uses a concentrated alkaline formula to break down grease, hair, soap scum, food residue, and other debris that accumulate in pipes over time. Unlike mechanical methods such as plungers or drain snakes, chemical drain cleaners work by generating a chemical reaction that dissolves the clog material directly. PlusProline Drain Cleaner is available in 500g, 1000g, and 2000g sizes, packaged in HDPE bottles with a child-safe aluminum foil-sealed locking cap. It is suitable for both residential and commercial plumbing systems.

Pour the product directly into the blocked drain. Once opened, it is recommended to use the entire contents of the bottle in a single application for both effectiveness and safety. After pouring, wait 15-30 minutes for the formula to dissolve the blockage. Once the waiting period is complete, flush the drain with cold running water for 2-3 minutes. Do not use hot water during or after application as it may cause a dangerous reaction with the active chemicals. For stubborn blockages, repeat the process with a new bottle. Never mix with other cleaning chemicals. Always ensure the area is well ventilated during application.

Do not use hot or boiling water with this product - cold water only for flushing. The chemical reaction generates heat on its own; adding hot water can cause splashing or release of hazardous fumes. Do not use on aluminum or zinc surfaces as the alkaline formula can cause corrosion. Never mix PlusProline Drain Cleaner with bleach, acids, or other chemical products as this can produce toxic gases. Do not use in completely stagnant water where the product cannot reach the blockage. Avoid skin and eye contact; if contact occurs, rinse immediately with plenty of cold water for at least 15 minutes. Do not use on damaged or cracked pipes. Once opened, the bottle must always be stored upright in a vertical position to prevent leaks. Keep out of reach of children at all times - once the safety cap has been opened, it is strongly recommended to finish the entire bottle rather than storing a partially used one.

For best results, use the entire bottle in one application rather than storing partially used product. Once the child-safe cap is opened, the seal is broken and safe long-term storage becomes difficult. If you must store an opened bottle temporarily, keep it strictly vertical, tightly sealed, in a cool dry place away from direct sunlight, and absolutely out of children's reach. Always flush with cold water only - never use warm or hot water as the product generates its own heat during the chemical reaction. If you notice slow drainage before a full blockage develops, treat it early - partial blockages are much easier to resolve. Choose the bottle size (500g, 1000g, or 2000g) based on the severity of the blockage so you can use the full contents in one session.